Friday 05 January, 2018 | RSS Feed

CNC Chip Grinding Machine:Professional iPhone Motherboard Repair

For professional cell phone repair technician, CNC chip grinding machine is an essential tool for getting perfect iPhone motherboard repair. During board repair process, using hot air gun is the old way to remove chips but it takes high risk of damaging the board with high temperature. No doubt, a damaged iPhone motherboard can be a great loss to repair shops, not only in economic area, but also something relating to reputation. So VIPFIX will introduce you a new machine for professional iPhone motherboard repair today!





A professional IC chip grinding machine is used to grind and remove a variety of chips without damaging the iPhone board. It is not only effective but also multi-functional, which can be a great help on professional repair work. 

What you know about the CNC chip grinding machine?

High grinding power. Grinding wheel relative to the workpiece for high-speed rotation, the machine can get a higher metal removal rate. With the development of grinding new technology, the power of grinding makes further progress, in some processes have replaced the turning, milling, planing, directly from the rough processing.

Large cutting power, also, the energy consuming is much. The grinding wheel is composed of a lot of abrasive CNC lathes, the distribution of abrasive grains in the grinding wheel is chaotic, cutting mostly at negative rake angle, and the tip has a certain circle Arc radius, and thus cutting power is large, machine energy consuming is much.

High flexibility. Replacement of the application software can easily be replaced within a certain range from the processing of one part to the processing of another part, which significantly reduces the equipment adjustment and production preparation time.

High precision machining tolerance and very low surface roughness. Each abrasive grain cutting off the chip layer is very thin, usually has several microns, so the appearance can get high precision and low surface roughness.

Wide processing range. Grinding wheel abrasive has high hardness, thermal stability, not only can be processed non-hardened steel, cast iron and non-ferrous metals and other materials, but also can processing hardened steel, all kinds of cutting tools and hard machine tools such as high hardness materials. Complete the machine operation and the process of automation.

Safety Guaranteed. Chips are difficult to be removed, since solder balls are easily melted while glues are not. With CNC Chip Grinding Machine, chip removing can be quick and safe without damaging the board.

How to operation the common CNC grinding machine?



1. Connecting Wire

CABLE CONNECTING

Connect the USB LPT interface of the controller with Operating PC. Connect the spindle interface of the controller with the grinding machine. Connect the engraving machine interface of the controller with the grinding machine. Connect the Operating PC with the monitor. Connect the water pipe of the grinding machine with the cooling pump.

WIRE UP

Wire up the controller, the monitor, the Operating PC, the light lamp. Get the wire-less keyboard and mouse prepared. Wire up the cooling pump. Turn on the power switch of the controller. Turn on the power button of the monitor. Turn on the power button of the Operating PC. Turn on the e-stop switch by rotating clockwise.

2. Preparing Grinding 

Open the software. On the software interface, click on the left mouse button and select 'Operation'. Click on the left mouse button and select 'Move to Reference Point' (The process goes with the per powering up of the grinding machine).

On the pop-up window, select 'All Axes' and wait for the grinding machine to move back to the original position of coordinates. After that, close up the pop-up window. Click and clear numerical value of X-axis and Y-axis.

3. Grinding Demonstrating 

In the manual mode, move the milling cutter of the grinding machine to the corresponding chip grinding area by clicking the control button of X-axis and Y-axis.

For example, put an iPhone 6 logic board on the corresponding iPhone 6 area. Replace with a new milling cutter when needed. Then fix the logic board to the mold.

On the software interface, click on the file icon. On the 'Open and load' window, select 'iPhone 6 Audio. nc' . Then start the Spindle.

In the manual mode, move the milling cutter of the grinding machine to the corresponding audio chip grinding area by clicking the control button of X-axis,Y-axis and Z-axis. Click the 'start' icon on the software interface, or click  'F9' to start grinding.

Click the 'top' icon on the software interface, or click 'F11' to stop grinding. On the blank area of the software interface, click on the right mouse button. On the pop-up window, adjust numerical value of Z-axis based on the actual situation.

After that, click the 'start' icon on the software interface, or click 'F9' to restart grinding. Once the welding spot comes out, stop the grinding process. Clear up chip residue and clean with PCB cleaner.

More professional cell phone repair technical questions contact VIP FIX Shop Team to find answers.


by CNFIXPHONE




Major Problems with iPhone 6 and Their Solutions

This article is about iPhone 6 major problems and their solutions. No matter what smartphone you are using, when you use a long time, there will always appear some problems. Even the most high-end smart phone - Apple, cannot escape the blame. Many people have enjoyed their iPhone 6, but sadly, many problems have arisen over the years. If you've run into some iPhone 6 problems, Vip Fix Shop Team will give you the right answer. Midway encounter some need to repair the steps, you better prepare the iPhone repair tools for maintenance.
 





Read More: DIY: Repairs The Most Common Smartphone Problem

1. iPhone is slow or lagging

When you update the iPhone 6, it may turn into sluggish. If you find that there are delays when tapping or swiping, or perhaps apps take a few seconds longer to open than they once did, then there are a few things you can try.

– Solutions:

• Restart your iPhone. Press and hold the Power button and Home buttons simultaneously, until you see the Apple logo.

• If that doesn't help, then try performing a factory reset and restoring your device from a backup.

2. iPhone screen freezes

When your iPhone 6 screen becomes frozening or stuck on Apple Logo, you can do these steps. 

– Solution:

• Use the lock button to turn the screen off and on again.

• Hold down the Power button and Home buttons until you see the Apple logo appear to reset your iPhone.

• Factory reset and restore your device as a new phone, or restore it from a backup.

• If they can't solve your problem, please contact Apple or going to an iPhone repair store. The problem may be with the hardware, not the software.

3. Can't hear during calls

When you can't hear the other caller during a phone call, but can make and receive calls as normal, or they sound muffled even when the volume is turned up.

– Solutions:

• Try using the iPhone Volume button and make sure that the ringer volume appears on screen.

• Make sure that nothing is covering the speaker.

• Make sure that you don't have anything plugged into the headphone port.

• Try turning Bluetooth off via Settings to make sure that you aren't connected to a headset or car system.

• Try toggling speakerphone on during a call.

4. iPhone 6 won't charge

iPhone 6 can't charge is a common problem, you can solve it by some simple methods. 

– Solution: 

• Make sure that you are using the cable and wall charger that came with your iPhone 6 or iPhone 6 Plus.

• Try using a different wall socket, a different cable, and a different charger.

• Take a look at the connector on your cable and the port on your iPhone. Make sure that they're clean and free of dust. 

• Check your iPhone USB cable is in humid or wet environment, maybe it can get corroded. 



5. Touch ID not working

When the iPhone 6 owners being unable to use Touch ID and attempting to remove and re-add fingerprints, but the Touch ID setup fails over and over. If it is not a hardware problem, don't worry. 

– Solutions:

• Hold the Power button and Home buttons to trigger a forced restart.

• Clean the area around the iPhone Home button.

• Go to Settings > Touch ID & Passcode, delete your fingerprints, and tap Turn Passcode Off. Turn your iPhone off and back on again, then go back to Settings > Touch ID & Passcode and set it up afresh.

• Create a backup using iTunes and restore your device using that backup. If the problem persists, try a factory reset, but don't restore the backup. Set it up and test to see if iPhone Touch ID works correctly.

More information about phone repair guides and tools, you can choose Vip Fix Shop Team.


by VIPFIXPHONE





News for Thursday 04 January, 2018


View all news for Thursday 04 January, 2018 on one page




Recent News




News archive