Professional Vacuum LCD Separator for Cell Phone Repair Heating Plate

Price:   $49.99

  • History: 9 Orders
  • Shipping Weight: 4.1kg
  • Units in Stock: 9988
  • Model: VC636

(complete orders today,deliverd around 19/11/2018 )
Professional-grade Repair Toolkits to Fix Your Phone
  • Delivery Time
    About 4-20 days.
  • Shipping Method
    DHL,UPS,EMS,FEDEX,HKPost..
  • Payment
    Paypal, WU, MoneyGram, TT..
  • Email us
    vipfixphone@gmail.com
  • New Products
    0.8mm Glass Fiber Panel Heat Sheild iPhone X PCB Motherboard Protector
    $0.99
    9205M Handhold Digital Multimeter Cell Phone Diagnostic Tool
    $3.99
    iPhone 8 Plus X Bare Logic Motherboard PCB Circuit Board Repair Parts
    $6.99  $5.99-14%
    Phone Fix 2 in 1 Stainless Steel Pry Opening Tools for Phone Disassembly
    $0.99  $0.29-71%
    • Details
    • Reviews
    • Tags
    • FAQ

    LCD Touch Screen Separator is a mobile phone repair machine, a heating platform with built in vacuum pump that used for seperation of phone LCD screen easily and quickly. This separator is available for all mobile phones below 7 inches.



    Professional Vacuum LCD Separator for Cell Phone Repair Heating Plate

    Feature:
     

    1. KT-946 Built-in Pump no need screen clamp
    2. Advanced tep controller. It can show both  the setting temperature and actual temperature at same time.
    3. Heat Area: 190x110 mm.Perfect for all 7 inch screen .
    4. Input Voltage: 220V
    5. Applicable Size: 7 inches or below



    1.The separate machine is suitable for cell phones of 11 ~ 19cm in length (for lcds under 7 inch).
    2.The machine is used for separating lcd and touch screen of Apple, Samsung, HTC ,Huawei, LG,Xiaomi Oneplus as well as other Smart Phones.
    3. If the LCD is still working well, you just need to replace the touch screen.
     


    Operation Introduction:

    1.Put your lcd with touch screen on the metal plate, lcd side above;
    2.Set the 4 arms to keep the touch screen on the metal plate stably;
    3.Turn on the machine and wait for the metal plate become 80-100 degree(can not beyond 100 degree);
    4.Start to separate the LCD off the glass with a core, then right and left movement with the core in between the lcd and the glass, please notice you must using gentle power and keep the core stay on the lcd surface, so that it will avoid the touch screen be damaged.