A Ultimate Tools To Query Bluetooth and WiFi - P13 Programmer
Good news, P13 Programmer Code Query Function Upgraded Again! It supports Factory code (Bluetooth /Wi-Fi Code) query, and there is no hard disk model restriction anymore, which is applicable for 8-13PM and iPad (BGA110 hard disk) and other mode.

P13, as a BGA60 /BGA70/ BGA110 PCIE NAND programmer and purple screen mode tool, is mainly for detecting, repairing, reading&writing NAND, and formatting. Now it can  supports Factory code (Bluetooth /Wi-Fi Code) query, and it is a new breakthrough.

One Box for support all Model. You don' t bother to connect internet or use Credits. More about 33 models include IX IOS device are supported by JC P13 box. Let's take stock of ALL its functions.


Function 1: P13 Code Query Function


1. Supports Factory code (Bluetooth /Wi-Fi Code) query, no hard disk model restriction.
2. Faster, more accurate, simpler, No cloud server required, accuracy is over 99%!
3. Applicable for 8-13PM and iPad (BGA110 hard disk) and other mode.


Function 2: P13 iPhone 12/13 series Formatted Nand Repair


1. Supported models of nand after formatting and repairing: XR, XS, XS Max,11 series, 12 series, 13 series and ipad models.

2. Supported 12/13 series nand: SDREGJHI4 SDREGJHI8 KIC M224 KIC M225 KIC M227KIC 5223KIC 5224

Function 3: Query the SYSCFG data


JC P13 programmer can query the SYSCFG data in the 1.2.00.87 version, with automatic algorithm to match of tens of millions of SYSCFG data, Check the iPhone NAND SYSCFG data, original Bluetooth/Wi-Fi code (Note: not 100% accurate).

Function 4: Query the SYSCFG Data Operation


1. Connect P13.
2. Click to query iCloud Syscfg.
3. Click to check more backup record.
4. Write or Save SYSCFG.

Function 5: Purple screen mode
Enter to purple-screen Diagnostics Mode just by one key. Restore change.backup write for syscfg(systeam config)without dismantling the hard Disk NAND from motherboard.

BGA60 /BGA70/ BGA110 Read / Write / Format. Boot code reprogram Support SYSCFG data modification & write, Unbind WIFI Brand-new NAND no need restoring device firmware, support to write the SYSCFG data directly.


HD OLED screen 

The OLED screen real time displays nand read&write status, current status, and intelligently monitors abnormalities, supporting upgrade software of JCID Assistant Platform, and continue to support subsequent models.

The item can Display NAND model, capacity, current Intelligent monitoring of operating status.


Both iRepair P12 and JC P13 support more nand models, Unbind Wi-Fi support iPhone/iPad models, no need restore after unbinding. 

Two modes of operation:Purple screen function+ Read & Write the NAND syscfg of iPhone/iPad without disassembly.

All in all, P13 Programmer support Independent operation, can achieve faster and more stable operation. JCID platform automatically upgraded, and more powerful functions continue to be updated. You deserve it.

P13 programmer

Leave a comment

All comments are moderated before being published