Before we are going to remove the broken MacBook Pro LCD screen, we need to test the MacBook first. Press the MacBook Pro power button, the MacBook Pro screen displays smoothly; just the LCD screen is broken. The broken screen will affect the usage of the MacBook, so we have to replace it.
Shutdown the MacBook Pro, use Qianli 2D screwdrivers to remove the screws that fix the MacBook rear case, and then remove the MacBook rear case. Disconnect the MacBook Pro battery, and then remove the upper part of the MacBook.
After removing the rubber ring, we need to use professional screen disassembling tools to remove the MacBook LCD screen.
Use Phonefix 861DW hot air rework station to heat the MacBook LCD screen, carefully control the temperature, don't be too hot. At the same time, use professional screen gravel thin blade to remove the LCD screen slowly.
Next we need to disassemble the iron strip under the LCD screen, because the new LCD screen doesn't comes with it. After disassembling the iron strip, fix it by double sided tape.
After reinstalling the MacBook Pro LCD screen, press the power button to turn on the MacBook Pro, the MacBook LCD screen can display normally. It accesses the system to test other functions of the MacBook, and everything is normal for the MacBook. So the LCD screen of MacBook was replaced successfully!
Hope the method in this article is useful to you. If you have other effective ways to fix the broken screen, please leave a comment in the comments.